DIY Appliance Repair Tips

Wait! Before you get the itch to hire an appliance repair CITY for help, you can keep your appliances in good condition with some of the troubleshooting tips below.

1. Smelly Washing Machine

A foul smell in your washer can defeat the reason for the appliance! If you’re trying to get your clothes so they are fresh and clean, but your unit will not cooperate, run an cycle without clothes/laundry in hot water and pour in 2 cups of white vinegar and a half-cup of baking soda to get rid of the unpleasant smell. This problem commonly occurs in front-loading washing machines. To prevent future smells, leave the door open between cycles to let it dry out.

2. Inefficient Refrigerant

A room-temperature fridge is not a good sign. A warm refrigerator definitely will not keep beverages cold, and the food on the inside could also be in danger of becoming spoiled! In most cases, your refrigerator will not need professional repair; interior might just need a cleaning. Or the coils on the rear of the appliance are overdue for cleaning.

Unplug the appliance and pull it away from the wall before wiping down the refrigerator coils. If you cannot see cooling improvement, it’s best to hire a professional appliance repair technician in CITY for a diagnosis.

3. Clicking Igniter on Stove

If the igniter on your gas oven continues to click and the burner won’t light, inspect to make sure your burner lid is in place and properly aligned. You may also notice this problem if you’ve recently had a boil over or liquid spill on your stovetop.

Otherwise, the source is most likely to be a clogged igniter. To clean , remove the burner top and wipe away any loose particles. You can use a metal pin to pick debris from the grooves of the igniter. If that doesn’t fix the issue, it’s safest not to take a lighter apart unless you have right training; in this case enlist a professional appliance repair company to diagnose the problem.

4. Broken Garbage Disposal

Your garbage disposal includes self-protection in the form of an overload trip switch. If it is clogged, overheats, grinds for too much time, or has some other issue, your garbage disposal could simply have to be reset rather than repaired. You should be sure the power switch is OFF. Then, find the button on the disposal unit beneath the kitchen sink and press the button. If the button will not stay pushed in, just wait ten minutes and attempt it again. Now, turn on the water and then turn the switch on.

If the garbage disposal is clogged with waste and you hear nothing but a humming noise and not waste grinding, you might need to manually turn the blades with a hex key tool to remove the jam. Next, push in the reset button to get the garbage disposal grinding again. If the previous tips do not get the appliance working like it should, please do not succumb to the temptation to stick your hands down into the system to investigate. Be safe and schedule an appointment with a professional appliance company in CITY.

5. No Power from Outlet

In a bathroom or kitchen, your electrical outlets must be equipped with GFCI capabilities in order to protect people against harm in wet environments. If a GFCI outlet is not providing power, press the red reset switch to see if that restores power.

If it does not, or if you are trying on a basic outlet, be certain that a breaker has not tripped in your home’s circuit breaker panel. If you’re uncertain if a breaker has been tripped, flip it to the OFF position and back to the ON position. Remember, safety near electrical outlets is critical. If you have doubts, call a professional repairman.

6. Wobbling Washing Machine

A wobbling washing machine can produce a startling banging and is not a ideal way to get wash clothing. If yours is suddenly banging, the washing machine may be broken. In order to fix this issue, rotate the legs on the appliance to lower or lift all corners until it is straightened out. One other likely scenario is that the washing machine is not leveled. Lift open the lid and rearrange the clothing items so they’re more evenly dispersed in the drum of the washing machine.

Trying this will help the washing machine not have to work quite as hard. If you try to arrange the clothes once or twice without success, don’t ignore the problem. You might have a loosened drum or motor mount to fix, which should be easy enough for a professional repairman to fix. But continuing to use the washing machine when it has this issue might destroy other parts and cause a worse repair over time.

Call for Help

If none of these quick fixes fix your problems, it’s time to schedule an appointment from Vance Appliance Repair!

OTHER RESOURCES:

Appliance Repair Cost
Appliance Safety
Emergency Appliance Repair
Repair or Replace Appliances
Refrigerator Parts